In this article, i am going to walk you through setting up a yealink phone, so that it can make and receive calls via a SIP/VoIP/TISP Provider. Plug the phone in to a DHCP enabled network, click on menu, status and find the IP address of the phone. Type this addres in to a computer…
Month: August 2012
SIP/VoIP: Simple Trouble Shooting…..
In this article I am going to cover some simple and common steps that a user of a VoIP/SIP telephony system can do before calling they VoIP provider. No inbound calls: Firewall – Make sure the firewall is not blocking inbound connection to the phone/PBX. As a general rule make sure that UDP ports 5060,…
Provisioning a Grandstream DP710 / DP715 DECT Phone
The following configuration steps have been tested with Grandstream handsets DP710 / DP715 with the firmware revision 1.0.0.5. Note that different firmware revisions may have a different web interface and/or different functionality. This guide is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone…
Provisioning a Panasonic KX-TGP500B01 DECT Phone
The following configuration steps have been tested with Panasonic KX-TGP500B01 using the KX-TPA50 handsets and firmware revision 22:58. Note that different firmware revisions may have a different web interface and/or different functionality. This guide is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone…